介绍一下轴承的公差符号, 方便大家在看样本时更好的理解数据.
- d/ds公称内径/单一内径(Nominal bore diameter/Single bore diameter)
- dmp单一平面平均内径(Mean bore diameter;arithmetical mean of the largest samallest single bore diamerers measured in one radial plane)
- △dmp单一平面平均内径偏差(dmp-d;Deviation of mean bore diameter from the nominal dimension)
- △ds单一内径偏差(ds-d;deviation of single bore diameter from the nominal dimension)
- Vdp单一径向平面内径变动量(Bore diameter variation;difference between the largest & smallest single bore diameters in one radial plane)
- Vdmp平均内径变动量(dmp max-dmp min;Mean bore diameter variation;difference between the largest & smallest mean bore diameters)
- D/Ds公称外径/单一外径(Nominal outside diameter/Single outside diameter)
- Dmp单一平面平均外径(Mean outside diameter;arithmetical mean of the largest & smallest single outside diameters in one radial plane)
- △Dmp单一平面平均外径偏差(Dmp-D;Deviation of mean outside diameter from nominal dimension)
- △Ds单一外径偏差(Ds-D;Deviation of mean outside diameter from nominal dimension)
- VDp单一径向平面外径变动量(Outside diameter variation;difference between the largest & smallest single outside diameter in one radial plane)
- VDmp平均外径变动量(Dmp max-Dmp min;Mean outside diameter variation;difference between the largest & smallest mean outside diameters)
- Bs/Cs内圈/外圈单一宽度(Single inner ring/outer ring width)
- △Bs内圈单一宽度偏差(Bs-B; Deviation of a single inner ring width from nominal dimension)
- △Cs外圈单一宽度偏差(Cs-C; Deviation of a single outer ring width from nominal dimension)
- VBs内圈宽度变动量(Bs max-Bs-min; Variation of inner ring widths; difference between the largest & smallest single inner ring width)
- VCs外圈宽度变动量(Cs max-Cs min; Variation of outer ring widths; difference between the largest & smallest single outer ring width)
- B,C,T轴承公称宽度/高度(Nominal bearing width/height)
- Ts轴承实际宽度/高度(Actual bearing width/height)
- △Ts轴承实际宽度/高度偏差(Deviation of the actual bearing width/height)
- Kia成套轴承内圈径向跳动(Radial runout of assembled bearing inner ring)
- Kea成套轴承外圈径向跳动(Radial runout of assembled bearing outer ring)
- Sd内圈基准端面对内圈的跳动(Side face runout of inner ring with reference to bore)
- SD外表面母线对基准端面倾斜度变动量(Variation in inclination of outside cylindrical surface to outer ring side face)
- Sia成套轴承内圈轴向跳动(Axial runout; assembled bearing inner ring face runout with raceway)
- Sea成套轴承外圈轴向跳动(Axial runout;assembled bearing;outer ring face runout with raceway)
- r公称倒角尺寸(Norminal chamfer dimension)
- rs径向/轴向单一倒角尺寸(Radial/axial single chamfer dimension)
- rs min最小径向/轴向单一倒角尺寸(Smallest radial/axial single chamfer dimension)
- rs max最大径向/轴向单一倒角尺寸(Largest radial/axial single chamfer dimension)